Reset Zosi DVR to Factory Settings Without Password?, Have you forgotten your password and want to reset your zosi DVR password, this guide is written to help you reset password Xmeye in less than a minute.
Here this reset password guide will be able to Reset Zosi DVR to Factory Settings Without Password in case you have forgotten it.
This article will show you how to reset password zosi DVR. If you’ve forgotten or misplaced your Zosi password, you can use the Zosi DVR password reset procedure, which takes less than 10 minutes to complete. This is the 2021 version, which is compatible with all Zosi DVRs.
Unlock Summary
Reset Password Zosi DVR
To reset or recover a forgotten password, follow these three simple steps: Find the Zosi DVR’s QR code, download the Zosi password generator app, and scan the QR code with the app to create a super password. That’s all there is to it. Using the generated master password, you can change the password.
Note: This method only works with Zosi DVRs; if you have a Zosi NVR, you must use the instructions in this article: On the Zosi NVR, reset the password.
Which Zosi DVR models are capable of being reset?
This Zosi password reset technique is compatible with the following Zosi DVR models: The model number can be found on a label on the bottom or side of the recorder.
Also, keep in mind that Zosi recorders are sold by a few different companies under different brand names. If the user interface is comparable, you can try the password reset procedure.
ZR04PN; ZR04PM; ZR04RN; ZR04RM; ZR04FN; ZR04FM; ZR04LN; ZR08KM; ZR08AN; ZR08AM; ZR08QN; ZR08QM; ZR08RN; ZR08RM; ZR08ZN; ZR08FN; ZR08FM; ZR08QM; ZR08QM; ZR08RN; ZR08RM; ZR
SKG08TV; SIG08TV; ZR04LS; QK08P; SLG08TV; SPG08TV; SLF08T8; AR08IS; PQ08W; SPG04T4; SPG04T2; QQ08P; ALG16TV; AR04JD; SLF08T8; AR08IS; PQ08W; SPG04T4;
How to Reset the Password on a Zosi DVR
To reset the password on a Zosi DVR, follow these three simple steps. Continue reading for more information.
- Get the SPD app on your phone (with the Zosi password generator).
- On the Zosi DVR, look for the QR code.
- Use the SDP app to scan the QR code.
1. Download the SPD app (Zosi SPD app – password generator) and install it on your device.
You’ll need the Zosi SPD app to reset the Zosi DVR password because it acts as a super password generator. This app is available for free on the App Store (for iPhone users) or Google Play (for Android users). So, go ahead and download the app and put it on your phone.
Important Note: It appears that Zosi complained about this program, and the SPD app was forced to be removed from the App Store and Google Play Store. If you can’t find the app on your phone, you can manually install it by downloading it from this link or this Google Drive link (the link works for Android phones only).
1. On the Zosi DVR, look for the QR code.
Scanning the QR code from the DVR’s label or sticker is required at this stage. This QR code represents the Zosi DVR’s unique ID/UID as it exits the manufacturing line. The QR code is usually found at the top or bottom of the recorder. In the images below, two examples are displayed.
3. Use the SDP app to scan the QR code.
Open the SPD app and select the method for entering the DVR’s ID. Scanning the QR code is the first choice, while manually entering the code (ID number) is the second. Scanning is frequently less difficult.
When prompted, tap “Start Scan QRCode” and grant the app permission to use the phone’s camera. Then point the camera at the QR code to scan it. The QR code will be read by the app in a matter of seconds.
The SPD app will produce a Zosi super password after scanning (a master password).
At the Zosi DVR login screen, type admin as the username and the super password generated by the SPD app as the password. After that, click “Login.” You should be able to access the DVR normally.
Important: Once the DVR has rebooted, the username will be admin and the password will be blank/empty (don’t write anything down, just click Login).
If you can’t scan, manually enter the DVR’s ID.
If the SPD app is unable to read the label due to damage, blurriness, or other factors, select HandWriting Input and manually enter the DVR ID. This ID can be located below the QR code on the DVR label (as shown in the pictures above).
For the DVR, you’ll need to create a new password.
Creating a new password to protect your recorder is an important step. Go to User Management and create a new password that is sufficiently difficult to guess. Make sure to mix letters, numbers, and symbols in your password. Leave the old password field blank and double-enter the new password.
That’s all there is to it. This is the Zosi password reset procedure in its simplest form. Make a mental note of your new password.
I’m still unable to reset my Zosi password.
If you’ve tried everything and the password still won’t reset, you should contact the vendor or manufacturer as a final resort. Simply send the recorders’ serial number and proof of purchase to Zosi, and they’ll assist you in resetting the password. If you bought something on Amazon or another online site, contact the seller and they’ll help you out.
Conclusion
This password technique is compatible with the majority of Zosi DVRs. Installing the SDP program, which is essentially the Zosi Password Generator, could be the problem. Some users are having issues installing it.
However, if you follow the instructions in the article mentioned above, you should be able to successfully install it and generate the Zosi super password. Take a look at our recommended security IP camera systems if you’re in the market for a new CCTV system.
If you’ve forgotten or misplaced your Zosi password, you can use the Zosi DVR password reset procedure. It takes less than 10 minutes to complete. This method only works with Zosi recorders; if you have a Zosi NVR, reset the password.
The Zosi DVR’s QR code represents the device’s unique ID/UID as it exits the manufacturing line. Scanning the QR code is the first choice, while manually entering the code (ID number) is the second.
The SPD app will produce a Zosi super password after scanning (a master password). If the SPD app is unable to read the label due to damage, blurriness, or other factors, select HandWriting Input and manually enter the DVR ID.
If you bought something on Amazon or another online site, contact the seller and they’ll help you out.
